Powerflex 700 power jumpers, Installation instructions

1. Powerflex 700s User Manual
2. Vector Control Santa Clara County
3. Powerflex 700 Troubleshooting Manual
4. Powerflex 700 Vector Control User Manual Instructions

Publication 20B-IN021B-EN-P

The PowerFlex 700 drive contains protective MOVs and Common Mode
Capacitors referenced to ground (see below). To guard against unstable
operation and/or damage, the drive must be properly configured as shown in

PowerFlex 700 AC Drives – Frames 010 Vector Control Firmware 4.001 and Up. The information below summarizes the changes to the PowerFlex 700 User Manual, publication 20B-UM002 since the last release. New and Updated Information. PowerFlex 70 Enhanced Control and PowerFlex 700 Vector Control Reference Manual, publication PFLEX-RM004. Ease of maintenance. The PowerFlex 700 with Vector Control features a control cassette that houses the main control board and I/O. This cassette, removable from the power structure, is the same for all drive ratings and greatly simplifies training, installation and maintenance for the entire product line. PowerFlex 700L AC Drives. PowerFlex® 700L AC Drives offer either PowerFlex 700 Vector Control or PowerFlex 700S Control on a fully regenerative, liquid-cooled power structure. This powerful combination offers great performance and high power capabilities in a small package along with energy savings and low harmonics. PowerFlex 70 Enhanced Control and 700 Vector Control Reference Manual, publication PFLEX-RM004 Information on installing and programming PowerFlex 70 standard control and enhanced control drives. PowerFlex 700 Series A User Manual, publication 20B-UM001 PowerFlex 700 Series B User Manual, publication 20B-UM002.

Important: All PowerFlex 700 drives are shipped with the DC bus common

The PowerFlex 700 Series A User Manual provides programming and troubleshooting information for Standard Control and Vector Control drives, Frames 06. Drive installation and wiring information is not in this manual, but can be found in the Installation Instructions for your drive: Frames 06 – publication 20B-IN019.

PowerFlex 700 AC Drives Vector Control Firmware 4.001 & Up, Frames 010 User Manual, publication 20B-UM002 Provides information on how to install, start-up and troubleshoot the PowerFlex 700 adjustable frequency AC drives with vector control. PowerFlex 750-Series AC Drives Technical Data, publication. Precharge Enable signal. Consult the factory for additional guidance. ATTENTION: An Auxiliary Control Power Supply Must Not be used with any PowerFlex 700 Standard Control drive or 200/240 Volt Vector Control drive. Using the power supply with these drives causes equipment/component damage.

mode capacitors referenced to ground.

The information in this document supersedes the MOV and Common Mode
Capacitor material in the following:

For additional general information, refer to:

Before proceeding, ensure that all power to the drive has been removed.

Title

Publication

PowerFlex 700 Vector Control User Manual

20B-UM002C

PowerFlex 700 Standard Control User Manual

20B-UM001G

PowerFlex 700 Installation Instructions - Frames 0…6 20B-IN019A
PowerFlex 700 Installation Instructions - Frames 7…10 20B-IN014E

Title

Publication

Available Online at …

PowerFlex 700 Vector Control User Manual

20B-UM002

PowerFlex 700 Standard Control User Manual

20B-UM001

Wiring and Grounding Guidelines for PWM AC Drives

DRIVES-IN001

Guarding Against Electrostatic Damage

8000-4.5.2

!

Powerflex 700s User Manual

ATTENTION: This drive contains ESD (Electrostatic Discharge)
sensitive parts and assemblies. Static control precautions are required
when installing, testing, servicing or repairing this assembly.
Component damage may result if ESD control procedures are not
followed. If you are not familiar with static control procedures,
reference A-B publication 8000-4.5.2, “Guarding Against
Electrostatic Damage” or any other applicable ESD protection guide.

R/L1

Vector Control Santa Clara County

S/L2

T/L3

DC+

DC–

MOV and AC EMI Capacitor Phase to Ground

Common Mode Capacitor to Ground

Jumper-Wire

Jumper-Wire

PowerFlex 700 Power JumpersHach pocket colorimeter ii expanded user manual.

Installation Instructions

Powerflex 700 Troubleshooting Manual

Powerflex 700 Vector Control User Manual Instructions