View and Download Allen & Heath ZED Sixty-10FX user manual online. ZED Sixty-10FX Music Mixer pdf manual download. Also for: Zed sixty-14fx, Zed sixty-10fx. Allen & heath ZED-10FX series Pdf User Manuals. View online or download Allen & heath ZED-10FX series User Manual. Ask the question you have about the Allen & Heath ZED-10FX here simply to other product owners. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Allen & Heath ZED-10FX owners to provide you with a good answer.

1. Allen And Heath Zed 10fx Manual
2. Zed 10fx Mixer
3. Zed 10fx Driver

Aug 26, 2017  I've been chatting with Allen and Heath support by email over the past week. Initially their response was that line level inputs can only be plugged into mono channels 3 & 4 or the stereo channels and directed me to the setup pages in the user manual. The ZED-10FX is made by Allen and Heath, it is a 10 channel mixer with 4 mic inputs and 3 stereo channels. There are about 15 or so effects built in to the ZED-10FX. All of the effects are a huge plus on this unit. Most of the time when companies come out with compact and portable mixers that don.

Allen & Heath 25 ZED-10FX User Guide

2009 Pontiac Vibe.Here you can find the most complete service and repair manual for 2009 Pontiac Vibe. Pontiac vibe repair manual. The 2009 Pontiac Vibe service manual contains hundreds of pages in pdf format to help you to solve your problem imediatly.

L

R

+16

-6
-9

-20
-30

-16

-12

-3

0

+3

+6

+9

Aux

+10

LEVEL

+10

+6

Source

Playback

Mix

Phones

MAIN MIX

OUT

AUX

OUT

FX

PH

ON

ES

S

ELE

CT

0

0

LEVEL

AUX MIX

LEVEL

LEVEL

Record

+10

0

0

Monitor

Rapid City Journal. Salvation army red kettle volunteer. Bill Sheets (November 28, 2007). Retrieved 2007-12-20. Cook (December 21, 2006).

Phones

O/P Level

Switch

Stereo Meters

12 Segment LED meters with fast attack (4mS) and

medium decay (1S).

The meters display the signals selected by the

Phones Select switches, or the mono Listen signal

(PFL) if activated by any of the Listen switches.

MASTER SECTION

PFL (Pre-Fade Listen) active LED

A red LED to indicate a Listen switch has been

pressed on one of the channels.

Doing this will override the Phones select source to

the headphones and send the Listen signal to the
meters.

Headphones level

Controls the volume of signal to the headphones.

Warning ! To avoid damage to
your hearing do not operate the
headphones or sound system at
e x ce ss ive ly h igh volu me .
Continued exposure to high
volume sound can cause frequency
selective or wide range hearing
loss.



!

Phones Source Selector switches

These switches allow you to choose what you hear

on the headphones. With all switches up the default

is the main stereo Mix, then you can choose be-

tween the Playback input (USB Input if nothing is

plugged into the jacks), the Aux bus output, or the

Record bus output. Pressing any Listen switch will

override the selection and allow you to monitor

individual channels.

Headphones Output
Standard 1/4” (6.25mm) jack socket wired Tip=Left,

Ring=Right, Sleeve=Ground.

Allen & Heath 29 ZED Sixty 10FX & 14FX User Guide

Allen And Heath Zed 10fx Manual

CONNECTING A ZED TO PRO TOOLS 9(& UP) ON A MAC

1. Connect your ZED mixer to your Mac via USB and power on the mixer.

2. With Pro Tools (PT) installed, open Audio MIDI Setup on your Mac. PT should have created a Pro Tools

Aggregate I/O folder in the Audio Devices list. The ZED interface should appear as USB Audio CODEC
in the list along with other audio devices in your system. Tick Use to enable the device in PT.

Zed 10fx Mixer

6. Select the inputs and outputs for your tracks in your

session. Here the input for mono Track 1 is selected as
the Left channel from the ZED USB interface. The track
outputs can either be routed to the ZED directly or to a
master bus in Pro Tools and then to the ZED. Be wary of
possible feedback loops when setting the routing to the
tracks and then back to the ZED.

5. In I/O Setup, click the Input tab. The input sources appear

for enabled devices in Pro Tools Aggregate I/O. Create a
new path for the inputs and name as you prefer. Note
that mono channels can use one channel of a stereo input
path. Make sure the path is ticked and click OK.

4. In PT click SETUP and then I/O. Select Output from the menu

and the devices available should appear in a box labelled PTAI/O
(Pro Tools Aggregate I/O). Here you can create a new output
path if one doesn’t exist, name it (here it’s called ZED Stereo
OUT) and tick it to enable.

3. Run Pro Tools and create a new session with at least two

audio tracks. Open the SETUP/Playback Engine window and
select Pro Tools Aggregate I/O as the Current Engine. Click
OK.

Audio MIDI Setup..

Zed 10fx Driver